OUTPUT WATTAGE

150W

BEST SOLUTION FOR

Server ,Workstation ,Storage System ,IPC ,Blade server

DIMENSION

150x81.5x40.3(mm)

5.91x3.21x1.59(inch)

INPUT SPEC

VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：2A (RMS) FOR 115 VAC / 1A (RMS) FOR 230 VAC
INRUSH CURRENT：35A MAX. FOR 115 VAC / 70A MAX. FOR 230 VAC

DC OUTPUT SPEC

FEATURES

* TEMPERATURE RANGE：OPERATING 0℃～50℃
* HOLD UP TIME：16mS MINIMUM AT 115V FULL LOAD
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
* EFFICIENCY：80%±2% TYPICAL，AT FULL LOAD 115Vac
* POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～170% MAX
* OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, AUTO-RECOVERED: +5VSB
* SAFETY : TO MEET UL, CUL, TUV, CCC
* REMOTE ON/OFF CONTROL
THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY).
AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* MEET IEC-1000-3-2 CLASS D


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.