OUTPUT WATTAGE

1010W

BEST SOLUTION FOR

Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication

DIMENSION

320x98.4x40(mm)

12.6x3.87x1.57(inch)

INPUT SPEC

VOLTAGE: 90~264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz
INPUT CURRENT: 15 / 7.5 A FOR 115 / 230 VAC
INRUSH CURRENT: 15 / 30 AMPS @115/230VAC.
HIGH FREQUENCY PEAK AMPLITUDES LASTING LESS
THAN 200US(AT 25DEGREES AMBIENT COLD START
FOR EACH POWER UNIT)

DC OUTPUT SPEC

FEATURES

* TEMPERATURE RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃ --- 80℃; OPERATING TEMPERATURE FROM 0℃ SHOULD START FROM AC 90V
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE
* EFFICIENCY: TYPICAL 84% AT 115V, 86% AT 230V, FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~150%
* OVER VOLTAGE PROTECTION: +3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* OVER CURRENT PROTECTION: THE POWER SUPPLY SHALL LATCH OFF IF THE +12V OUTPUT CURRENTS ARE OVER IT’S LIMITATION. THE LIMITED CURRENT IS OVER 110~150% FOR EACH POWER MODULE.
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V OUTPUT TO DC RETURN SHALL CAUSE NO DAMAGE AND POWER SUPPLY LATCH, -12V SHORT CIRCUIT TO DC RETURN SHALL CAUSE NO DAMAGE.
* SAFETY: MEET UL, CUL, TÜV
* MEET IEC-1000-3-2 CLASS D

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.