Products

2U RedundantDM1U2-5650V4V


 

OUTPUT WATTAGE

650W

BEST SOLUTION FOR

Server ,Workstation ,Storage System ,IPC ,Communication

DIMENSION

400x54.5x84.6(mm)

15.75x2.15x3.39(inch)

INPUT SPEC

VOLTAGE:-40 ~ -72VDC
FREQUENCY: 0HZ (DC)
STEADY-STATE CURRENT: 20/10 AMPS MAXIMUM AT ANY
LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 10A MAX. @-48VDC INPUT(AT 25DEGREES
AMBIENT COLD START)
START UP CURRENT: 20 AMPS MAX. @ -48VDC INPUT
(AT 25DEGREES AMBIENT COLD START)

DC OUTPUT SPEC

Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V 0 22 ±5% ±1% 50mV
+12V 2 54 ±5% ±1% 120mV
-12V 0 0.5 ±5% ±1% 120mV
+3.3V 0 22 ±5% ±1% 50mV
+5VSB 0.1 3 ±5% ±1% 50mV
* POWER MODULE TOTAL OUTPUT POWER OF +5V AND +3.3V NOT EXCEED 150W
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 650W

FEATURES

* TEMPERATURE RANGE:OPERATING 0℃~50℃, STOREAGE -20℃~80℃
* HOLD UP TIME:WHEN POWER SHUTDOWN ALL DC OUTPUT MUST BE MAINTAIN 1mS IN REGULATION LIMIT AT -48V
* EFFICIENCY(PER SET):TYPICAL 85% AT -48V
* OUTPUT PROTECTION: OPP / OVP / OCP / SCP
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

 

 DOWNLOAD
CE (Radiation)

keywords:zippy,1U Redundant,1U Single,2U Redundant,2U Single,3U Single,Cloud Power,Easy Swap,Medical,Micro Redundant,Mini 1U Single,Mini Redundant,N+1 Redundant,Open Frame,PS2,PS2*2 Redundant,PS2+,Redundant module