Products

N+1 RedundantM1W4-5R20V3H


 

OUTPUT WATTAGE

2720W

BEST SOLUTION FOR

Server ,Workstation ,Storage System

DIMENSION

340x422x43(mm)

13.39x16.61x1.69(inch)

INPUT SPEC

VOLTAGE:90~264VAC FULL RANGE
FREQUENCY:47~63HZ
INPUT CURRENT:45/22.5A FOR 115/230VAC
INRUSH CURRENT (PER POWER MODULE):15/30A MAX. FOR 115/230VAC (25℃)

DC OUTPUT SPEC

Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
+5V 1 24 ±5% ±1% 50mV
+12V 6 223 ±5% ±1% 120mV
-12V 0 1.5 ±5% ±1% 120mV
+3.3V 1 24 ±5% ±1% 50mV
+5VSB 0.1 4 ±5% ±1% 50mV
TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 135W.
TOTAL OUTPUT POWER NOT EXCEED 2720W.

FEATURES

* TEMPERATURE RANGE:OPERATING 0℃~50℃,STORAGE -20℃~80℃
* HOLD UP TIME:16mS IN REGULATION LIMIT AT 90 VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND:INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY:84% TYPICAL,AT FULL LOAD 115VAC
* POWER GOOD SIGNAL:ON DELAY 100mS TO 550mS
* OVER POWER PROTECTION:110~150% MAX
* OVER VOLTAGE PROTECTION:+5V→5.7V~6.5V,+3.3V→3.7V~4.1V ,+12V→12.8 V~13.9V
* SHORT CIRCUIT PROTECTION: +5V,+12V,+3.3V,-12V,+5VSB
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* AC INLET IN EACH MODULE
* EMI NOISE FILTER: CISPR 22 CLASS B
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* SAFETY:TO MEET UL, CUL, TUV


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

 

 DOWNLOAD
TUV
CCC
MTBF(ROHS)
DRAWING

keywords:zippy,1U Redundant,1U Single,2U Redundant,2U Single,3U Single,Cloud Power,Easy Swap,Medical,Micro Redundant,Mini 1U Single,Mini Redundant,N+1 Redundant,Open Frame,PS2,PS2*2 Redundant,PS2+,Redundant module